Frameless Glass Fencing

Introduction

This spigot can incorporate a highly polished look or a satin brushed look with sophistication and elegance that will enhance your swimming pool area. This type of frameless fencing has been designed with safety for your pool area as a priority. It has tapered edges eliminating footholds. It is capable of a deck mount or core drill into paving. It has no pins through the glass and has a clamp action on the glass with the ability to adjust whenever required.

If the glass of the frameless pool fence is accidentally broken there is no need to remove the spigot. Preparation costs are minimized with the no need for a channel in the concrete when installing the glass. Because the glass is elevated from the paving or decking water and debris can flow underneath it, scum won't build up on the bottom of the glass and the glass cannot get scratched when cleaning. This is a modern solution to fencing pools.

Technical

The spigot is made from structural marine grade stainless steel 316 it has been designed to eliminate any bolts to tighten the glass, it has two Allen key adjustments that hold the glass. The spigot is salt safe for swimming pools and beaches and coastal homes.

It has marine grade stainless steel 316 adjusting screws corrosion resistant.

Care and maintenance

Washing regularly with a soft brush and mild detergent followed by a fresh water rinse will maintain the long term performance of your spigots. A light coating of baby oil will prevent tea staining.

Warning: strong abrasive house hold cleaners and solvents including those recommend for thinning paints such as MEK or paint thinners are harmful to powder coating these must not be used. Acidic and alcohol based cleaning products should not be used either.

Features

• Comes with a 7 year workmanship warranty
• Can be deck mounted or core drilled into paving
• Frameless 12mm toughened Glass fencing
• Top rail frameless Glass fencing.
• Pinned Glass
• Glass can be removed without removing the spigot
• No in ground channel required
• No additional site preparation required
• Glass is installed at end of the job reducing damage
• Water can flow under the glass dirt and leaves are then not
  trapped on the glass edge
• Easy to clean
• Larger sheets of glass can be used
• Grouting and expansion joints are not required
• No scaffolding required on high rise buildings
• Can be used on sloping sites
• Gates can be hung directly on glass no posts required
• Allows tiling to be completed prior to installation
• Non corrosive
• Maintenance free!