Frameless Glass Fencing

Introduction

This spigot has been designed to incorporate a natural anodised look using 25 microns of anodise. It has been electroplated on top of treated aluminium, giving it a luster without any corrosive qualities. It is capable of being deck mounted or core drilled into paving. It does not require pins through the glass as it uses a clamp action on the glass panel which enables adjustment whenever required.

If the glass panel is accidentally broken there is no requirement to remove the spigot. Preparation costs are minimized as there is no need for a channel in the concrete or paving when installing the glass fence. The glass is elevated from the paving or decking allowing water and debris to flow underneath it. This means that dirt and scum won't build up on the bottom of the glass which may lead to scratching whilst cleaning. This is a modern and effective solution to your fencing needs

Technical

The spigot is made from structural aluminum which is then anodised with 20-25 micron of clear anodise, meaning it is maintenance free and does not corrode

The spigot is resistant to salt corrosion and is therefore ideal for salt-water swimming pools, beach areas and coastal homes.

It has stainless steel 316 adjusting corrosion resistant screw

Care and maintenance

Just as you maintain the appearance of your car, powder coated and glass surfaces need routine cleaning to remove dirt and grime. This ensures that you maintain the decorative and protective properties of the coating. Just a gentle clean wash with a soft brush and mild detergent followed by a fresh water rinse will maintain the long term performance of your powder coated products.

Warning: strong abrasive house hold cleaners and solvents including those recommend for thinning paints such as MEK or paint thinners are harmful to powder coating these must not be used. Acidic and alcohol based cleaning products should also not be used.

Features

• Comes with a 7 year workmanship warranty
• Can be deck mounted or core drilled into concrete or paving
• Frameless 12mm toughened Glass fencing
• Top rail frameless Glass fencing.
• Pinned Glass
• Glass can be removed without removing the spigot
• No in ground channel required
• No additional site preparation required
• Water and debris can flow under the glass minimizing the collection of dirt and grime
• Easy to clean
• Larger sheets of glass can be used
• Grouting and expansion joints are not required
• No scaffolding required on high rise buildings
• Can be used on sloping sites
• Gates can be hung directly on glass no posts required
• Allows tiling to be completed prior to installation
• Non corrosive
• Maintenance free - other than routine cleaning!