Frameless Glass Fencing

Introduction

This spigot has been designed to incorporate a highly polished look. It has been electroplated on top of treated aluminum, giving it a luster without the corrosive qualities. It is capable of a deck mount or core drill into paving. It has no pins through the glass and has a clamp action on the glass with the ability to adjust whenever required.

If the glass is accidentally broken there is no need to remove the spigot. Preparation costs are minimized with the no need for a channel in the concrete when installing the glass. Because the glass is elevated from the paving or decking water and debris can flow underneath it, scum won't build up on the bottom of the glass and the glass cannot get scratched when cleaning. Modem effective solution to your fencing needs.

Technical

The spigot is made from structural aluminum and then is electro plated with 20 micron of nickel chrome plate, meaning maintenance free with no corrosion but with a high polished look.

The spigot is salt safe for swimming pools and beaches and coastal homes.

It has stainless steel 316 adjusting screws corrosion resistant.

Care and maintenance

You maintain the appearance of your car with washing similarly, powder coated services need routine cleaning to remove dirt and grime. This ensures that you maintain the decorative and protective properties of the coating. Just a gentle clean wash with a soft brush and mild detergent followed by a fresh water rinse will maintain the long term performance of your powder coated products.

Warning: strong abrasive house hold cleaners and solvents including those recommend for thinning paints such as MEK or paint thinners are harmful to powder coating these must not be used. Acidic and alcohol based cleaning products should not be used either.

Features

• Comes with a 7 year workmanship warranty
• Can be deck mounted or core drilled into paving
• Frameless 12mm toughened Glass fencing
• Top rail frameless Glass fencing.
• Pinned Glass
• Glass can be removed without removing the spigot
• No in ground channel required
• No additional site preparation required
• Glass is installed at end of the job reducing damage
• Water can flow under the glass dirt and leaves are then not
  trapped on the glass edge
• Easy to clean
• Larger sheets of glass can be used
• Grouting and expansion joints are not required
• No scaffolding required on high rise buildings
• Can be used on sloping sites
• Gates can be hung directly on glass no posts required
• Allows tiling to be completed prior to installation
• Non corrosive
• Maintenance free!