316L Stainless Steel Marine Grade Round Spigot with Welded Base Plate for Deck Mount

NEW! No fixing or holes in glass required!

This spigot has been designed to incorporate a highly polished look with the sophistication and elegance that will enhance your swimming pool area. It has been designed with safety for your pool area as a priority. It has elegant slim line tapered edges eliminating footholds. It is capable of a deck mount or core drill into paving. This spigot requires no holes in the glass, no fixings and no pressure plates. Its simplicity in design is what sets this spigot apart from others.

If the glass is accidentally broken there is no need to remove the spigot. Preparation costs are minimized with the no need for a channel in the concrete when installing the glass. Because the glass is elevated from the paving or decking water and debris can flow underneath it, scum won’t build up on the bottom of the glass and the glass cannot get scratched when cleaning. Modern effective solution to your fencing needs.

Features

• Comes with a 7 year warranty
• Can be deck mounted or core drilled into paving
• Frameless 12mm toughened Glass fencing
• Top rail frameless Glass fencing.
• Pinned Glass
• Glass can be removed without removing the spigot
• No in ground channel required
• No additional site preparation required
• Glass is installed at end of the job reducing damage
• Water can flow under the glass dirt and leaves are then not trapped on the glass edge
• Easy to clean
• Larger sheets of glass can be used
• Grouting and expansion joints are not required
• No scaffolding required on high rise buildings
• Can be used on sloping sites
• Gates can be hung directly on glass no posts required
• Allows tiling to be completed prior to installation
• Non corrosive
• Maintenance free!

Technical

The spigot is made from structural marine grade stainless steel 316 it has been designed to eliminate any bolts to tighten the glass. The spigot is salt safe for swimming pools and beaches and coastal homes. It has marine grade stainless steel 316 adjusting screws corrosion resistant.

Care and maintenance

Washing regularly with a soft brush and mild detergent followed by a fresh water rinse will maintain the long term performance of your spigots. A light coating of baby oil will prevent tea staining.

Warning: strong abrasive house hold cleaners and solvents including those recommend for thinning paints such as MEK or paint thinners are harmful to powder coating these must not be used. Acidic and alcohol based cleaning products should not be used either..